Spa Recommendations

  1. Make sure filter(s) are rinsed regularly, once every week or two with average use.
  2. The filtration system should be filtering at least 6-8 hrs per day. 24-7 filtration is recommended if possible. Always leave all jets including neck jets, waterfalls, etc open slightly when spa is not in use, this will allow our enzymes to circulate fully within the hot tubs & spas water.
  3. Add recommended amount of The Natural Hot Tub Company® Water Treatment & Conditioner every 3-months. (1/2-bottle for spas up to 250 gallons or 1-full bottle for spas up to 500 gallons).
  4. If your source water is hard water then the recommended amount of a Stain & Scale Control (Non-Toxic Defender), should be used weekly, following directions on bottle. If you are on a well with high iron or other metals, definitely use a garden hose pre-filter. If you have already filled your spa, Metal Gone may be used. All recommended products may be found on our website.
  5. Rinse Filters with hose nozzle with high pressure or save water and time with our Filter Flosser.
  6. Shocking your spa water every week is recommended or anytime you have cloudy water or get an organic odor.  To shock, you can use 99% sodium dichlor chlorine granules or a non-chlorine shock, like Leisure Time Renew.  To be more environmental we suggest 99% sodium dichlor, because this particular type of chlorine dissipates out of your spa water, when you run all pumps on high with the cover open for 30 minutes (be sure all jets are open). This will also ensure you don’t have to soak in chlorine, or breathe in the fumes while enjoying your hot tubs & spas.
Usage 1-2 persons
2 times weekly
2 persons
2-3 times weekly
3-4 persons
2 times weekly
3-4 persons
3-4 times weekly
Rinse Filters Every 10-14 days Every 10-14 days Weekly Weekly
Add / Shock Shock w/ 99% DiChlor
Weekly
Shock w/ 99% DiChlor
Weekly
Add 99% DiChlor
After Use
Add 99% DiChlor
After Use