Return Policy
Our goal is to provide exceptional customer service and satisfaction. You must notify us within 60 days of your purchase. Defective or damaged merchandise. We will replace those items at no additional cost to our customer. Merchandise was ordered incorrectly by the customer. The customer must ship the product(s) back […]
Why should I use a carbon block redox pre-filter if I have municipal water?

Municipal water can have minerals and metals that can cause problems with your hot tub water. By using the carbon block redox pre-filter, you can remove those unwanted particles.
Do The Natural Hot Tub Company products work with a high efficiency hot tub?
Most high efficiency hot tubs circulate just a couple hours a day. It would be necessary to adjust the circulation to 6-8 hours a day in order to use our products.
What should I use to clean my hot tub cover?

We recommend using 1 part bleach to 9 parts water to remove any mold.
How often should I test my water?

You should test your water when you refill your tub to ensure the pH, alkalinity and hardness are within range. Please note the ranges for The Natural Hot Tub Company products are different than what is on the test strips.
Is your product compatible with UV radiation?
Yes, if you are considering purchasing a new tub, we highly recommend that you get a tub with the UV radiation.
Is your product compatible with an ozonator?
Yes, and we highly recommend you have one. An ozonator can be added to most hot tubs if yours does not have one.
Do I have to drain my tub to switch to your product?
In order to switch to the Natural Hot Tub Company products, you first need to go through the cleansing process using the Penetrating Spa Cleanser and that can be added directly to your existing water. After you go through the cleansing process, then you will drain the tub and follow directions for newer spa tubs.
Does the Water Treatment and Conditioner have an expiration date?
No, it does not have an expiration date but we recommend it be used within five years.
How often should I shock?
You should shock once a week or after any heavy use of the hot tub.
How do I adjust my hot tub to circulate for a minimum of 6-8 hours?
All hot tubs are different and you need to refer to your owner’s manual or contact the manufacturer.
Is it ok if the tub goes unchecked for three to four weeks?
Yes, you should shock your hot tub right before you leave and it should stay clear and clean until you return.
How often do I change the water in my hot tub?
Your water should be changed at least once a year. We recommend the spring and fall for our customers who live in cooler climates to avoid having to change your water in freezing temperatures.
How often do I need to clean my filters?
The enzymes require an efficient filtration and it is important to keep your filters clean. You should rinse your filters using a garden hose nozzle every 7 -10 days. We suggest you use the Natural Hot Tub Company Filter Soak every 4 – 6 weeks for a deep cleaning.
Can I use a mineral stick with your product?
The Natural Hot Tub Company Water Treatment and Conditioner is compatible with any brand mineral stick. Most of our customers do not find that it is necessary to use with our products.
Why do you have to go through the cleansing process for older tubs?
What will happen if I don’t? It is important to go through the cleansing process for older tubs because the traditional maintenance programs create a chemical buildup in your hot tub piping. If you do not go through the cleansing process, the Water Treatment and Conditioner will slowly remove that chemical buildup and often […]
Can I use a 1 micron disposable filter with your products?
The enzyme system requires efficient filtration. The 1 micron disposable filter does work with our products but our research has found that the life of the filter is much shorter than advertised. Therefore, we prefer that you use pleated filters with your hot tub.
Can I use a non-chlorine shock with The Natural Hot Tub Company Water Treatment and Conditioner?
Yes, MPS is compatible with the water treatment and conditioner. We recommend Leisure Time Renew.
Can I use your product with a soft tub?
Absolutely! Our products are safe and effective to use with a soft tub.
Are The Natural Hot Tub Company® Products more expensive than traditional chemicals?
No, in fact much less expensive than the traditional hot tub maintenance programs. The Natural Hot Tub Company program does not require using as many products for maintaining your spa year round.
Recently I noticed my Spa water was getting a little cloudy.
Cloudy water may be caused by several things. Deodorants, lotions, body creams, soap residue in bathing suits, and make-up. Another cause can be from not performing filter maintenance frequently enough.
Do I have to use anything else with water treatment and conditioner?
For the majority of our customers, the Natural Hot Tub Company Water Treatment and Conditioner and an oxidizer are the For the majority of our customers, the Natural Hot Tub Company Water Treatment and Conditioner and an oxidizer are the primary products needed. There are two oxidizers that are effective: 99% sodium dichlor chlorine granules […]
White Flakes
Also known as “Water Mold”. Water mold is caused by a contaminated garden hose. It generally happens when a hose with residual water is left out in the sun. The process listed below may have to be repeated in severe cases. Water Mold Decontamination Process: 1 – Put 1 tsp. of chlorine granules down the faucet […]
Foam
Foam Excessive foaming is often a result of a buildup of body oils, cosmetics and soap residue left in bathing suits. Just remove foam with a skimmer net and rinse your filter(s). You may have to do this several times. Very small amounts of ‘Dirty Foam’ at times may appear. This is simply the Natural […]
Frequently Asked Questions

this is an excerpt
Organic Odor

Ensure your circulation is between 6 and 8 hours a day as many of the high efficiency hot tubs only circulate 2 hours at the factory setting. Check your owner’s manual for directions on how to increase your circulation. If you do have an organic odor be sure all jets including neck, waterfalls, etc., are […]
High or Low pH / Alkalinity

Wait at least 24 hours after adding the Natural Hot Tub Company Water Treatment and Conditioner before testing your water. Our pH acceptable range is 7.2 to 8.2 which is different than what is on the test strip bottle. Our products are not pH dependent so we can have a larger range. If your hot […]
Sandpaper Feel
aka “Scale” A rough feel on the sides or bottom of your hot tub is caused by scaling. This is when the calcium comes out of solution and turns into a solid. To prevent scaling, it is important to keep your total hardness between 150 and 200 and your alkalinity between 80 and 120. To […]
Green Tinted Water

One common cause of green water is dyes from bathing suits. It is best to rinse bathing suits in hot water without any detergent before using them in the hot tub. Another common cause is unwanted minerals and metals. To remove unwanted minerals and metals, we recommend the use of a garden hose carbon block/redox […]
Cloudy Water
The effectiveness of the Natural Hot Tub Company Water Treatment and Conditioner requires an efficient filtration system. If your filters are older than 12 months, you may need to replace them. The circulation needs to be between 6 and 8 hours a day. Refer to your owner’s manual on how to adjust it. You should […]
Spa Recommendations
How it Works
What are Enzymes? Enzymes are strings of proteins that catalyze bio-chemical reactions. This simply means they “jump start” bio-chemical reactions that are vital for human life. Enzymes are present in all living cells. Enzymes are very specific in what chemical reactions they catalyze. Enzymes are used by cutting-edge biochemists in the war against disease. Enzymes […]
Maximize the efficiency of your spa
Knowing how your hot tub functions and how to properly maintain your hot tub will minimize the need for many harsh chemicals to be added to your hot tub water. Here are some of the basic features that you find on most hot tubs and their importance to the success of the Full Circle Program: […]
Minimizing Source Water Impurities
Whether you are on municipal or well water, they both can introduce impurities into your hot tub that interfere with the proper chemical balance of your water. Having your water tested is one way to determine if source water impurities are too high but we highly recommend using a garden hose carbon block pre-filter no […]
Minimizing Bather Impurities
There are two issues that effect the amount of bather impurities that enter your spa water. One is bather frequency which is the number of different bathers and how often they use the spa. Bather impurities are introduced to the spa through our bathing suits and what is on our skin such as lotions, deodorants, […]
Helpful Tips
Water Testing
Before testing your water always run pumps on high for at least 1-minute for better accuracy. Water Temperature Range: 90 degrees or higher pH Level: 7.2-8.2 / Alkalinity: 80 – 120 • Our Water Treatment & Conditioner helps stabilize at these levels. • See Hamilton Index for more information on proper hot tub water balance. Total Hardness: 150-250ppm • If hard water, […]